This combo package features radiator, fan shroud, and fans pre-mounted and shipped together.<br>Fan Setup: 12" Dual Fan 1400 CFM EA<br><br>Wiring Kit, Not included: Suggested SKU 224791<br>Note thickness of total package = Radiator thickness + 4 Inches (allow 6-7 total inch for unit)<br>Radiator Details are below:<br><br><br><br>1966-1968 Chevy Impala Aluminum Performance Radiator. These COLD-CASE radiators are Tig welded 100 percent aluminum and absolutely beautiful. Don't buy a 3 or 4 row aluminum radiator! It doesn't cool as good as these oversize 2 row models.<br><br>These radiators are original appearing and have the correct stamping. Once painted, you'd be hard pressed to find a difference over an original versus a COLD-CASE.<br><br>100 percent TIG welded<br>All Aluminum<br>Polished OE style tanks<br>(2) 1.25 inch Tubes<br>16 fins per inch<br>Corrugated fins that give more surface area and more thermal transfer<br>Pressure tested<br>For auto/maunal trans<br>Direct fitment for 66-67 Impala<br>Radiator Specs<br><br>Core Height 17.5 inch<br>Core Width 25.1 inch<br>Overall Height 23.5 inch<br>Overall Width 28.75 inch<br>Overall Thickness 3 inch<br>Tubes (2) 1.25 inch Tubes<br>Upper Hose 1.50 inch<br>Lower Hose 1.77 inch<br>Trans Cooler Fitting: 5/16" Inverted Flare<br>Old Part Number: RPE566<br><br>Will fit in a 1961-1965 impala as well. Water neck and upper hose needs to be swapped for a 66-68 style to fit. This option is a good one for those looking for maximum cooling as upper LH and lower RH inlet/outlet is much more efficient than upper and lower being on the same side.<br><br>Trans Cooler Fitting Size: <br>5/16 Inch Inverted Flare